基于拉格朗日方法的通气云状空泡三维非定常脱落特性研究

采用均相流模型并结合FBM湍流模型,对绕轴对称回转体通气云状空泡流动特性进行了三维数值模拟,基于实验结果对数值方法进行验证,同时利用基于拉格朗日体系的有限时间李雅普诺夫指数(FTLE)、拉格朗日拟序结构(LCS)和粒子追踪方法分析了其三维非定常脱落特性。研究结果表明:纵截面上空泡覆盖区域的拉格朗日拟序结构整体呈椭球状分布,内部为不规律的复杂拟序结构;不同横截面上拟序结构分布存在很大差异。空泡内部的非对称流动结构和周向流动导致空泡呈现很强的三维运动特性。反向射流在周向上推进的不同步性,是造成空泡呈现不规则断裂和大尺度U型空泡团脱落的主要原因。     

基于单应性矩阵的模型迎角单目视频测量方法

风洞试验中模型迎角的精准测量是降低阻力系数误差的重要途径之一，为此，提出了基于单应性矩阵的模型迎角单目视频测量方法。该方法通过两个单应性矩阵，获取试验过程中相机实时位姿和标记点物方空间位置坐标，应用坐标旋转关系，完成试验模型的迎角测量。数值仿真试验结果表明：迎角测量误差与待测标记点到风洞壁板间的距离偏差近似为线性关系，因此，当标记点不满足共面条件时，可根据该特点进行测量误差修正。静态标定和风洞迎角测量试验结果表明：修正系统误差后，迎角实测数据的测量准度在0.01°以内，精度不超过0.012°。本文方法易于实施，工程实用价值强。     

低温推进剂空间管理技术研究进展与展望

本文介绍了低温推进剂的性能优势与空间管理挑战，梳理了低温流体空间管理(CFM)技术特征及其研究现状，建议按照重力依赖型与重力无关型分类开展技术成熟度提升研究。调研了美国逾半个世纪的CFM技术搭载实验研究历程，分析了各类平台的工作特性与性能优势。基于我国航天发展现状与未来需求，探析了我国开展CFM技术攻关、飞行搭载实验的可行方案。建议在我国载人空间站规划舱内低温技术实验柜与舱外暴露平台实验模块，加速我国CFM技术向工程应用的转化。     

高效能源系统管理与控制技术

能源系统是飞行器的关键技术之一,能源系统性能的优劣对飞行器能否正常飞行及实现预定任务有重要影响。本文针对大功率飞行器对分布式循环能源系统的管理需求,开展高效能源系统管理与控制技术研究,提出一种集逐级调压控制、限流充电控制、恒流输出控制以及最大功率点跟踪(MPPT)控制为一体的层级梯次控制策略,实现分布式系统的全局优化控制和飞行器能源的功率优化调度。研制的能源管理系统(PCU)配备1条234～328 V高压母线,额定功率15 kW,电路效率大于97%,功率密度大于750 W/kg。PCU依托分布式架构,采用层级梯次控制策略,验证了高效能源系统管理与控制技术的正确性和有效性。     

Fault diagnosis based on measurement reconstruction of HPT exit pressure for turbofan engine

Aero-engine gas path health monitoring plays a critical role in Engine Health Management(EHM). To achieve unbiased estimation, traditional filtering methods have strict requirements on measurement parameters which sometimes cannot be measured in engineering. The most typical one is the High-Pressure Turbine(HPT) exit pressure, which is vital to distinguishing failure modes between different turbines. For the case of an abrupt failure occurring in a single turbine component, a model-based sensor measurement reconstruction method is proposed in this paper. First,to estimate the missing measurements, the forward algorithm and the backward algorithm are developed based on corresponding component models according to the failure hypotheses. Then,a new fault diagnosis logic is designed and the traditional nonlinear filter is improved by adding the measurement estimation module and the health parameter correction module, which uses the reconstructed measurement to complete the health parameters estimation. Simulation results show that the proposed method can well restore the desired measurement and the estimated measurement can be used in the turbofan engine gas path diagnosis. Compared with the diagnosis under the condition of missing sensors, this method can distinguish between different failure modes, quantify the variations of health parameters, and achieve good performance at multiple operating points in the flight envelope.     

Effects of yaw-roll coupling ratio on lateral-directional aerodynamic characteristics

Experimental investigation of large amplitude yaw-roll coupled oscillations was conducted in a low-speed wind tunnel using an aircraft configuration model. A special test rig was designed and constructed to provide different coupled motions from low to high angles of attack.A parameter ‘‘coupling ratio" was introduced to indicate the extent of yaw-roll coupling. At each pitch angle, seven coupling ratios were designed to study the yaw-roll coupling effects on the lateraldirectional aerodynamic characteristics systematically. At high angles of attack, the damping characteristics of yawing and rolling moments drastically varied with coupling ratios. In the coupled motions with the rotation taking place about the wind axis, the lateral-directional aerodynamic moments exhibited unsteady characteristics and were different from the ‘‘quasi-steady" results of the rotary balance tests. The calculated results of the traditional aerodynamic derivative method were also compared with the experimental data. At low and very high angles of attack, the aerodynamic derivative method was applicative. However, within a wide range of angles of attack, the calculated results of aerodynamic derivative method were inconsistent with the experimental data, due to the drastic changes of damping characteristics of lateral-directional aerodynamic moments with yaw-roll coupling ratios.     

超声速气流中复杂冷却结构的传热分析方法

针对应用于高超声速吸气式发动机中的复杂再生冷却结构,为了更好地对其进行传热性能评估,在充分借鉴液体火箭发动机传热分析方法的基础上,集成多种成熟高效的技术,建立了一种解耦的传热分析方法。该方法首先借助计算流体力学技术确定结构件工作的热环境,提取必要的参数后依据半经验关系式确定气侧的换热边界条件;然后,通过将冷却流动假设成一维流动,根据换热准则确定液侧的换热边界;最后,对冷却结构进行有限单元离散,计算传热过程,获得温度场特征。该方法将换热与导热过程解耦,降低了研究问题的复杂性,适用于复杂构型的热防护设计。通过后掠尖缘再生冷却支板的热防护试验,证实了传热分析方法的可靠性,且显示算法对本例的预测误差约在8%左右。     

基于任务的微机电惯性系统规模化测试技术研究

针对传统惯性测试技术测试周期长、测试效率低、测试成本高等问题，提出了基于任务的微机电惯性系统规模化测试解决方案。研究分析了微机电惯性系统测试技术的研究现状和发展趋势，建立了基于任务的微机电惯性系统测试体系，详细论证了微机电惯性系统批量、并行、自动化测试解决方案的可行性，为微机电惯性系统规模化测试实践奠定了基础。     

运载火箭交叉输送系统关键影响因素辨识与分析

为深入了解交叉输送系统特性，辨识关键影响因素及其影响规律，通过系统建模与仿真分析开展交叉输送系统关键影响因素研究。推导了交叉输送系统关键组件数学模型，基于AMESim软件构建了系统仿真模型。研究表明，贮箱气枕压差和输送管路流阻是两大关键影响因素。为保证推进剂按额定流量交叉输送，必须对各子级箱压进行精确调节。由于助推上游主管路和交叉输送管路流阻对系统性能影响较大，在设计交叉输送系统时应该尽量缩短助推上游主管路和交叉输送管路，并尽量减小不同助推的管路流阻偏差。